Internet-Draft | The HTTP QUERY Method | November 2024 |
Reschke, et al. | Expires 23 May 2025 | [Page] |
This specification defines a new HTTP method, QUERY, as a safe, idempotent request method that can carry request content.¶
This note is to be removed before publishing as an RFC.¶
Discussion of this draft takes place on the HTTP working group mailing list (ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/.¶
Working Group information can be found at https://httpwg.org/; source code and issues list for this draft can be found at https://github.com/httpwg/http-extensions/labels/query-method.¶
The changes in this draft are summarized in Appendix B.7.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 23 May 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This specification defines the HTTP QUERY request method as a means of making a safe, idempotent request that contains content.¶
Most often, this is desirable when the data conveyed in a request is too voluminous to be encoded into the request's URI. For example, this is a common query pattern:¶
However, for a query with parameters that are complex or large in size, encoding it in the request URI may not be the best option because¶
As an alternative to using GET, many implementations make use of the HTTP POST method to perform queries, as illustrated in the example below. In this case, the input parameters to the query operation are passed along within the request content as opposed to using the request URI.¶
A typical use of HTTP POST for requesting a query:¶
This variation, however, suffers from the same basic limitation as GET in that it is not readily apparent -- absent specific knowledge of the resource and server to which the request is being sent -- that a safe, idempotent query is being performed.¶
The QUERY method provides a solution that spans the gap between the use of GET and POST, with the example above being expressed as:¶
As with POST, the input to the query operation is passed along within the content of the request rather than as part of the request URI. Unlike POST, however, the method is explicitly safe and idempotent, allowing functions like caching and automatic retries to operate.¶
Summarizing:¶
GET | QUERY | POST | |
---|---|---|---|
Safe | yes | yes | potentially no |
Idempotent | yes | yes | potentially no |
Cacheable | yes | yes | no |
Content (body) | "no defined semantics" | expected (semantics per target resource) | expected (semantics per target resource) |
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The QUERY method is used to initiate a server-side query. Unlike the HTTP GET method, which requests that a server return a representation of the resource identified by the target URI (as defined by Section 7.1 of [HTTP]), the QUERY method is used to ask the server to perform a query operation (described by the request content) over some set of data scoped to the target URI. The content returned in response to a QUERY cannot be assumed to be a representation of the resource identified by the target URI.¶
The content of the request defines the query. Implementations MAY use a request content of any media type with the QUERY method, provided that it has appropriate query semantics.¶
QUERY requests are both safe and idempotent with regards to the resource identified by the request URI. That is, QUERY requests do not alter the state of the targeted resource. However, while processing a QUERY request, a server can be expected to allocate computing and memory resources or even create additional HTTP resources through which the response can be retrieved.¶
A successful response to a QUERY request is expected to provide some indication as to the final disposition of the operation. For instance, a successful query that yields no results can be represented by a 204 No Content response. If the response includes content, it is expected to describe the results of the operation.¶
Furthermore, a successful response can include a Content-Location header field (see Section 8.7 of [HTTP]) containing an identifier for a resource corresponding to the results of the operation. This represents a claim from the server that a client can send a GET request for the indicated URI to retrieve the results of the query operation just performed. The indicated resource might be temporary.¶
A server MAY create or locate a resource that identifies the query operation for future use. If the server does so, the URI of the resource can be included in the Location header field of the response (see Section 10.2.2 of [HTTP]). This represents a claim that a client can send a GET request to the indicated URI to repeat the query operation just performed without resending the query parameters. This resource might be temporary; if a future request fails, the client can retry using the original QUERY resource and the previously submitted parameters again.¶
In some cases, the server may choose to respond indirectly to the QUERY request by redirecting the user agent to a different URI (see Section 15.4 of [HTTP]). The semantics of the redirect response do not differ from other methods. For instance, a 303 (See Other) response would indicate that the Location field identifies an alternate URI from which the results can be retrieved using a GET request (this use case is also covered by the use of the Location response field in a 2xx response). On the other hand, response codes 307 (Temporary Redirect) and 308 (Permanent Redirect) can be used to request the user agent to redo the QUERY request on the URI specified by the Location field. Various non-normative examples of successful QUERY responses are illustrated in Appendix A.¶
The semantics of the QUERY method change to a "conditional QUERY" if the request message includes an If-Modified-Since, If-Unmodified- Since, If-Match, If-None-Match, or If-Range header field ([HTTP], Section 13). A conditional QUERY requests that the query be performed only under the circumstances described by the conditional header field(s). It is important to note, however, that such conditions are evaluated against the state of the target resource itself as opposed to the collected results of the query operation.¶
The response to a QUERY method is cacheable; a cache MAY use it to satisfy subsequent QUERY requests as per Section 4 of [HTTP-CACHING]).¶
The cache key for a query (see Section 2 of [HTTP-CACHING]) MUST incorporate the request content. When doing so, caches SHOULD first normalize request content to remove semantically insignificant differences, thereby improving cache efficiency, by:¶
Note that any such normalization is performed solely for the purpose of generating a cache key; it does not change the request itself.¶
The "Accept-Query" response header field MAY be used by a resource to directly signal support for the QUERY method while identifying the specific query format media type(s) that may be used.¶
Accept-Query = 1#media-type¶
The Accept-Query header field specifies a comma-separated listing of media types (with optional parameters) as defined by Section 8.3.1 of [HTTP]. field syntax currently discussed in https://github.com/httpwg/http-extensions/issues/2860¶
The order of types listed by the Accept-Query header field is not significant.¶
Accept-Query's value applies to every URI on the server that shares the same path; in other words, the query component is ignored. If requests to the same resource return different Accept-Query values, the most recently received fresh (per Section 4.2 of [HTTP-CACHING]) value is used.¶
The QUERY method is subject to the same general security considerations as all HTTP methods as described in [HTTP].¶
It can be used as an alternative to passing request information in the URI (e.g., in the query section). This is preferred in some cases, as the URI is more likely to be logged or otherwise processed by intermediaries than the request content. If a server creates a temporary resource to represent the results of a QUERY request (e.g., for use in the Location or Content-Location field) and the request contains sensitive information that cannot be logged, then the URI of this resource SHOULD be chosen such that it does not include any sensitive portions of the original request content.¶
A QUERY request from user agents implementing CORS (Cross-Origin Resource Sharing) will require a "preflight" request, as QUERY does not belong to the set of CORS-safelisted methods (see "Methods" in [FETCH]).¶
IANA is requested to add the QUERY method to the HTTP Method Registry at <http://www.iana.org/assignments/http-methods> (see Section 16.3.1 of [HTTP]).¶
Method Name | Safe | Idempotent | Specification |
---|---|---|---|
QUERY | Yes | Yes | Section 2 |
IANA is requested to add the Accept-Query field to the HTTP Field Name Registry at <https://www.iana.org/assignments/http-fields> (see Section 16.1.1 of [HTTP]).¶
Field Name | Status | Structured Type | Reference | Comments |
---|---|---|---|---|
Accept-Query | permanent | Section 3 of this document. | field syntax currently discussed in https://github.com/httpwg/http-extensions/issues/2860 |
The non-normative examples in this section make use of a simple, hypothetical plain-text based query syntax based on SQL with results returned as comma-separated values. This is done for illustration purposes only. Implementations are free to use any format they wish on both the request and response.¶
A simple query with a direct response:¶
Response:¶
A simple query with a direct response:¶
Response:¶
A subsequent GET request on /contacts/responses/42 would return the same response, until the server decides to remove that resource.¶
A GET request on /contacts/queries/17 however would execute the same query again, and return a fresh result for that query:¶
Response:¶
A simple query with an Indirect Response (303 See Other):¶
Response:¶
Retrieval of the Query Response:¶
Response:¶
A simple query being redirected:¶
Response:¶
Redirected request:¶
Response:¶
This section is to be removed before publishing as an RFC.¶